Product ID:MIL SPEC POUR (B COMPONENT)
MSDS Date:05/25/1994
FSC:8135
NIIN:01-203-5827
MSDS Number: BWXTZ

INSTA-FOAM PRODUCTS INC

1500 CEDARWOOD DRIVE
JOLIET, IL 60435
US

Emergency Phone: 815-741-6800 EXT 56

Info Phone: 800-800-3626

Preparer: M ORTEGA

Cage: 54577

INSTA-FOAM PRODUCTS INC

JOLIET, IL 60435 US

Telephone: 815-741-6800

Cage: 54577

POLYETHER POLYOL

Fraction By Weight: 40-70%

AMINE CATALYSTS

Fraction By Weight: 1-6%

FLAME RETARDANT MATERIAL

Fraction By Weight: 7-13%

EMULSIFIERS

Fraction By Weight: 0.1-1%

SILICONE SURFACTANT

Fraction By Weight: 1-5%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATION TO EYES, SKIN & MUCOUS
MEMBRANES
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION

First Aid:EYES: FLUSH W/CLEAN LOW PRESSURE WATER FOR 15 MINS. SKIN:
WASH W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION:
GIVE LARGE AMOUNT OF LIQUIDS. DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Flash Point: >200F
Extinguishing Media:CO2, DRY CHEMICAL FOAM, WATER
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS.

Spill Release Procedures:CONTAIN & COLLECT USING SUITABLE ABSORBENT
MATERIAL SUCH AS SAWDUST/VERMICULITE.

Handling and Storage Precautions:PROTECT CONTAINERS FROM PHYSICAL
ABUSE. AVOID DIRECT SUNLIGHT. STORE AT TEMP 60-90F.

Respiratory Protection:USE ONLY IN WELL VENTILATED AREAS.
Ventilation:INSUFFICIENT VENTILATION.
Protective Gloves:REQUIRED
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING RECOMMENDED
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health

Spec Gravity:1
Appearance and Odor:CLEAR YELLOWISH LIQUID W/MILD ODOR

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:DIRECT SUNLIGHT, TEMP >60-90F.
Hazardous Decomposition Products:CO, CO2, NITROGEN OXIDES, AMMONIA,
TRACES OF HYDROGEN CYANIDE

Waste Disposal Methods:DON'T PUNCTURE/INCINERATE. RELIEVE PRESSURE
BELOW 40 PSI BEFORE RETURNING TANKS TO INSTA FOAM PRODUCTS, INC.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.